We Offer the Right Handed Option Only
Types of Construction:
3 Piece (3 Pieces glued together), the center piece is typically between 4 and 5 inches wide.
2 Piece (2 Pieces glued together) with a center seam running down the center of the body.
1 Piece (1 Piece without any glue joints)
2-3/16" is Fenders Standard Neck Pocket Width.
2-1/4" is for those that have custom necks with a 2-1/4" Heel Width.
Strat style has the curved heel, whereas the Tele Style has a squared off heel.
Angled Pockets are for certain types of non recessed floating bridges, ie, Floyd Rose.
Vintage Tele Single Coil in the Neck and Bridge Position (Pickguard Style)
This is the Diagonal rout that goes from the neck pickup to the control cavity, used to accommodate drilling a hole for the pickup wire,
Our Standard bridge option for this body style is a Ashtray style Vintage Bridge with rear ferrules (Ferrule size 5/16 X 3/8 with 1/16 Recessed Lip)
Standard for this style body is a Hotdog Rout on the top
Standard is 7/8" Hole in the side
Administrative Up-Charge--These are charges that are reserved for special circumstances and incidentals that are not accounted for on our main order menus. Please leave this selection set to “NONE” unless directed by MusiKraft sales personnel.
Order Change Policy