We Offer the Right Handed Option Only
Standard Setup is for Fender Style Necks 21 or 22 Fret.
Custom would be for the use of our 24 Fret Replacement Necks. Most 24 fret aftermarket necks will not work with our 24 fret routed bodies. Our Bridge rout is moved up .75" rather than a large fingerboard extension that requires moving the neck pickup.
Types of Construction:
3 Piece (3 Pieces glued together), the center piece is typically between 4 and 5 inches wide.
2 Piece (2 Pieces glued together) with a center seam running down the center of the body.
1 Piece (1 Piece without any glue joints)
2-3/16" is Fenders Standard Neck Pocket Width.
2-1/4" is for those that have custom necks with a 2-1/4" Heel Width.
Strat style has the curved heel, whereas the Tele Style has a squared off heel.
Angled Pockets are for certain types of non recessed floating bridges, ie, Floyd Rose.
Single Coil rout would accommodate both Vintage and Modern Single Coils.
Humbucker rout will accommodate both vintage and modern style humbuckers, including pickups with the drop down ears.
Direct Mount Humbucker are routed to .75" deep without the drop down ears, simply put, you would screw the pickup directly to the would versus spending it with springs on a pickguard.
P-90 (Non Dog Ear Style) Pickup Rout is 3.48" X 1.46" X .75" Deep
Our Standard bridge option for this body style would be the 6 screw 2-7/32 option. As you can see we offer additional spacing variations according to your style bridge spacing.
Cover Plates for rear routs included
Standard is our 60's style, the 50's style is a deeper cut (More wood removed)
Our Tummy Cut is the same for both our 50's and our 60's style bodies
Our Standard is 7/16" Strat Style roundover.
Administrative Up-Charge--These are charges that are reserved for special circumstances and incidentals that are not accounted for on our main order menus. Please leave this selection set to “NONE” unless directed by MusiKraft sales personnel.
Order Change Policy